View ET72007_1114376.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

05165
ET720
STEERING DIODE ARRAY
APPLICATIONS Ethernet - 10/100/1000 Base T Cellular Phones Handheld Electronics FireWire USB Interface IEC COMPATIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns 61000-4-5 (Surge): 12A, 8/20s Level 1 (Line-Ground) & Level 2 (Line-Line) F E AT U R E S ESD Protection > 40 kilovolts Provides 14 Lines of Protection Low Leakage Current < 20nA Ultra Low Capacitance: 3pF Typical RoHS Compliant CHARACTERISTICS
SO-16
MECHANICAL
Molded JEDEC SO-16 Package Weight 0.15 grams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory for Leaded Device Availability Flammability Rating UL 94V-0 16mm Tape and Reel per EIA Standard 481 Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package
PIN CONFIGURATION
VCC
VIO
VI/O
VI/O
VI/O
VI/O
VI/O
VI/O
16
15
14
13
12
11
10
9
1
VI/O
2
VI/O
3
VI/O
4
VI/O
5
VI/O
6
VI/O
7
VI/O
8
GND
05165.R5 2/07
1
www.protekdevices.com
ET720
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER
Operating Temperature Storage Temperature Continuous Power Dissipation
SYMBOL
TA TSTG PPC
VALUE
-55 to 150 -55 to 150 145
UNITS
C C mW
ELECTRICAL CHARACTERISTICS PER LINE
PART NUMBER DEVICE MARKING REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) VRRM VOLTS ET720 ET720 30 TYPICAL FORWARD VOLTAGE 8/20s @1A VF VOLTS 2
@ 25C Unless Otherwise Specified MAXIMUM REVERSE LEAKAGE CURRENT VRRM @ 20V IR nA 20 MAXIMUM QUIESCENT SUPPLY CURRENT @20V IRQ nA 200 TYPICAL CAPACITANCE (See Note 2)
MAXIMUM PEAK PULSE FORWARD CURRENT 8/20s IFM AMPS 12
@0V, 1MHz Cj pF 3
Note 1: VRRM is +VCC for pin 16, -VEE for pin 1. Note 2: Measure Cj between any VI/O pins to ground and divide by 2.
FIGURE 1 NON-REPETITIVE PEAK PULSE CURRENT CAPABILITY
8
IPP - Peak Pulse Current - % of IPP Peak Pulse Current - Amps
120 100 80 60 40 20 0 tf
FIGURE 2 PULSE WAVE FORM
Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8s td = 20s
6
e-t
4
2
td = t I /2 PP
0 0.001
0.01
0.1 1 Square Wave Pulse - ms
10
100
0
5
10
15 t - Time - s
20
25
30
05165.R5 2/07
2
www.protekdevices.com
ET720
GRAPHS
200
FIGURE 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP
TA = 25C SINGLE PULSE See Figure 2
Forward Current - mA
160
120
80
40
0 600
800 1,000 Forward Voltage Drop - mV
1,200
5
FIGURE 4 TYPICAL HIGH CURRENT FORWARD VOLTAGE DROP
TA = 25C SINGLE PULSE See Figure 2
4
Forward Current - A
3
2
1
0 0
1 2 Forward Voltage Drop - V
3
05165.R5 2/07
3
www.protekdevices.com
ET720
SO-16 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
-A-
SO-16
16
9
PACKAGE DIMENSIONS
-B- P 1 8
0.010" (0.25 MM) M BM
8 PL
DIM A B C D F G J K P R
NOTES
MILLIMETERS MIN MAX 9.80 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25
INCHES MIN MAX
G C 0 - 7 -TK 16 PL
0.010" (0.25 MM) M TBS
M
R X 45
D AS
F
J
10.00 0.386 0.393 0.150 0.157 4.00 1.75 0.054 0.068 0.49 0.014 0.019 0.049 1.25 0.016 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.008 0.009 0.004 0.009 0.25 6.20 0.229 0.244 0.019 0.50 0.010
MOUNTING PAD
0.050" TYP 0.030" 0.005"
1. 2. 3. 4. 5. 6.
- T - = Seating Plane and Datum Surface. Dimensions "A" and "B" are Datum. Dimensions "A" and "B" do not include mold protrusion. Maximum mold protrusion is 0.015" (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs.
TAPE & REEL/BULK ORDERING NOMENCLATURE
1. 2. 3. 4. 5. Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e. ET720-T7. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e. ET720-T13. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e. ET720-LF-T7. No Suffix = Product Shipped in Tubes of 48 pcs per Tube.
0.160" 0.005"
0.245" MIN
0.045" 0.005"
Outline & Dimensions: Rev 1 - 11/01, 06007
COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com
www.protekdevices.com
05165.R5 2/07
4

▲Up To Search▲

Price & Availability of ET72007

	To Download ET72007 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .